Home :: MAMOD SPARES :: Roadster SA1 specific parts

Roadster SA1 specific parts

Listed here are the specific parts for the Mamod SA12 Roadster.

These parts are also for the Le Mans Racer, Limo, Fire Engine, Bus and Van.

 

Suitable for models made with Drive Bands on EACH SIDE of the car.

Two bands of different size supplied. 

£8.95
Quantity

Brand new Mamod Drive Bands (2) to fit the current type Mamod Roadster SA1 and variants.  Both Drive Bands on same side of car.

£7.79
Quantity

 MAMOD SA1 ROADSTER BACK AXLE

ALSO FOR LIMO / VAN / BUS 

Length =  162mm

£9.90
Quantity

 STEAM ROADSTER REAR AXLE BRASS SPACER

For your Mamod Roadster etc. upgrade.

The Rear Axle requires a spacer on one side to bring the wheel out to match the width of the front wheels.
 

£10.37
Quantity

ROADSTER ETC. SA1
This pulley fits onto the back axle and is joined by drive band (driving) to the brass pulley close to the flywheel (get it?).

The diameter is 58mm.

£19.02
Quantity

SR1A  KIT TYPE - NO SOLDERING REQUIRED.

Produced in green powder coated finish. This type requires a boiler pipe union nut to attach the steam pipe.

The steam pipe needs no soldering to the boiler because a union with O ring is used.

That needs to be purcased separately here:  (HEX-UNION-NUT

£61.11
Quantity

For the SA1 Steam Roadster/ Limo.

£53.89
Quantity

For the Mamod SP4 engine.

£61.11
Quantity
NEW ITEM RELEASED 2020 BY MAMOD
ORIGINAL TYPE NOW DISCONTINUED
 
STEAM (SA1) ROADSTER BRASS HEADLIGHTS
£24.71
Quantity

This is the pulley that fits the current style SA1, WHERE BOTH DRIVE BANDS ARE ON THE SAME SIDE OF THE VEHICLE.

There is a short drive band that connects this Pulley to the Flywheel and a longer one that connects the Flywhel to the driving road wheel.

This 32mm diameter pulley has no screw fixing but is an interference fit onto the shaft. If it is not a tight fit you can use a drop of Loctite or super glue.

£10.36
Quantity

ROADSTER SA1

 These beautiful new seats will transform your car.

Black "leather" and cream coloured metal assembly.

£25.32
Quantity

Dimension: Shaft Length 101mm.

The shaft diameter is suitable for all current engines and almost all older engines but not the small MM1 stationary engine. No one makes those now.

You will have to measure and cut to length using a hack saw for all engines other than the SA1 Roadster.

£12.40
Quantity

ROADSTER ETC. SA1/
This Freshly pressed Engine Cowl will be bought by the real model engineers amongst you! Absolutely not for beginners with just a screwdriver..... unless you are going to borrow a drill, rivet gun and buy a few rivets too. And on the subject of rivets, the correct type for this Cowl are sold by Model Enthusiasts on a separate listing. But for the real adventurous enthusiasts rebuilding a model car etc., this is the item that will make your vehicle a head turner. Not sure? You just wait 'till you fit it........ "'
scuse me mister, can I see your model?"........You see if I'm not right.

£24.20
Quantity

ROADSTER ETC. SA1

 

 

If you are looking for a new (spray painted black) fire box for any of these, then you are in luck:

STEAM ROADSTERS.....
LIMOUSINE
FIRE ENGINE
STEAM WAGON
LONDON BUS
DELIVERY VAN.

Don't forget that you will need rivets and if you are feeling flush (who isn't!?) you really should buy a new chrome bonnet (engine cowl) if you are serious about impressing the birds.

£26.89
Quantity

ROADSTER ETC. SA1
This is made for the SA1 type vehicles such as the Steam Roadster.

DIMENSIONS: OD 1.89 INS/ ID 0.185 INS

£21.24
Quantity

ROADSTER ETC. SA1
This is made for the SA1 type vehicles such as the Steam Roadster.

BLACK INTRODUCED 2020.

DIMENSIONS: OD 1.89 INS/ ID 0.185 INS

£21.24
Quantity

ROADSTER ETC. SA1:
If you are looking for a new Engine Face with all the pipes plus the forward and reverse lever for any of these, then you are in luck: STEAM ROADSTERS, LIMOUSINE, FIRE ENGINE, STEAM WAGON, LONDON BUS, DELIVERY VAN.

£28.17
Quantity

This one has NO fixing screw but if you need one with the fixing screw, please go to:

 https://www.modelenthusiasts.com/MAMOD-ROAD-WHEEL-(ONE-)-SA1-ROADSTER-WITH-AXLE-FIXNG-SCREW.html

Price is for one wheel.

£23.69
Quantity

This one has a fixing screw to tighten it to the rear axle.

If you want the no-fixing type please go here: 

https://www.modelenthusiasts.com/MAMOD-ROADSTER-RED-ROAD-WHEEL.html

Price is for one wheel.

£23.69
Quantity

Quality from Mamod Ltd

Self adhesive and pealed from their backing strip and applied to a clean, dry surface.

 

£3.11
Quantity Out of stock - call 0777 552 1452 to order

This steering wheel with column is fitted to the SA1 range of vehicles. It is all very well made and will last in good condition for many many years. This type was introduced early 2020.

£31.33
Quantity

Just occassionally we hear of a right old knackered car that wanders all over the place with one wheel going one way and the other off in another direction. Well, maybe yours needs an overhaul in the nether regions?

£20.02
Quantity

For your Steering Rack that has lost its King Pin.

£11.43
Quantity

ADMIT IT.... YOU'VE BEEN LOOKING FOR ONE OF THESE FOR FLIPPIN' AGES!

"Do you know what Olive, you know that windscreen on my steam car....... you remember? The one you dropped the iron on when you had to run into the kitchen because you had to serve up my dinner and you hadn't realised it was 6 o'clock..... you remember Olive? Well, I've found one at last! Olive, just put the kettle on while I get on the internet.......

Don't forget yer rivets mate!

Comes in sprayed black.

£19.02
Quantity