We are OPEN!!!!
Delivery delays are possible
Home :: MAMOD SPARES :: Power Items

Power Items

Mamod Power Items

When the stream leaves the boiler it activates these "power" components.

 

Dimension: Shaft Length 101mm.

The shaft diameter is suitable for all current engines and almost all older engines but not the small MM1 stationary engine. No one makes those now.

You will have to measure and cut to length using a hack saw for all engines other than the SA1 Roadster.

£9.90
Quantity

BRAND NEW FOR ALL MAMOD OSCILLATING PISTON FOR ENGINES SUPPLIED BY MAMOD LTD

£4.49
Quantity

STEAM ROLLER SR1A

THIS IS THE SHORTER OF THE TWO SIZES - FOR THE STEAM ROLLER/ STEAM WAGON

See detailed description!

 

£23.75
Quantity

THIS IS THE LONGER OF THE TWO MOUNTING BRACKET SIZES. THIS IS FOR THE TRACTION ENGINE.

£23.75
Quantity

SP4 REVERING LEVER: Quite difficult to find anyone selling these little levers. This is the one currently being fitted to the SP4 engines now being made.

£9.18
Quantity

ROADSTER ETC. SA1:
If you are looking for a new Engine Face with all the pipes plus the forward and reverse lever for any of these, then you are in luck: STEAM ROADSTERS, LIMOUSINE, FIRE ENGINE, STEAM WAGON, LONDON BUS, DELIVERY VAN.

£23.75
Quantity

MINOR-MM1/ MECCANO

Check dimensions please.

Distance from centres of steam hole to threaded hole is 10.00mm - (the important dimension)

Length of the PISTON+ROD to the centre of the crank hole is 35.0mm. (small difference is OK).

The overall cylinder length is 30.00 mm. (small difference is OK).

£19.80
Quantity

This item is the right part for all Traction Engines/ Steam Rollers/ Steam Wagons/ Cars etc. plus the old MM2 & SP3 Meccano type engines with the silver-grey frame.

These things do wear out when you've given your engine a bashing or the wear of the passing years takes its toll. Here's a clue to help you decide if you need a new one; there is steam and water everywhere - the wife tells you to put it away - and it hardly turns over.

For: TE1A / SR1A / SW1/ SA1 / SP2 / SP3 / MM2 plus all vehicles.

£17.49
Quantity
 
Owing to the possibility/likelihood of historical manufacturing variations,
 before you click to purchase it is important to be sure this
 assembly is correct for your particular engine.
 Therefore pleaae read the detailed description page.
 
 
£7.19
Quantity

BRAND NEW MAMOD STANDARD PISTON FOR ENGINES TE1A/ SR1A/ SA1/ SW1/  SP2 / SP3 / MM2 SUPPLIED BY MAMOD LTD.  NEW ONE PIECE DESIGN 2020 WITH ACCURATE PISTON OIL GROOVES.

£7.19
Quantity

BRAND NEW MAMOD SE1/ SE1A/ SE2/  SE3/  SP4 / SP5  PISTON CYLINDER ASSEMBLY SUPPLIED BY MAMOD LTD NOT FOR SE2A.  PLEASE READ THE DETAILS BEFORE ORDERING. 

£17.49
Quantity