Home :: Mamod Engines Spares: Detailed View

Mamod Engines Spares: Detailed View

Mamod spares and parts top image

Mamod Spares and Parts Produced by Mamod Ltd and Independent Manufacturers in UK

All 100+ spares and parts listed in three pages below.

MAMOD STEAM ENGINE THREE  WASHERS for 3/8ths " DIA. SAFETY VALVE  

Our three washers are the best type to use because they are "flexible-hard" indicating they do not compress during over enthusiatic tightening.

£2.14
Quantity

Mamod SA1 Roadster Decal from Mamod Ltd.

Self adhesive and pealed from their backing strip and applied to a clean, dry surface. 

£3.09
Quantity

All models.

This1/8th-inch diameter copper piping.................... 

£3.57
Quantity

FOR YOUR TRACTION ENGINE / STEAM  ROLLER / STEAM WAGON STEERING FORKS.

£3.90
Quantity
H2MAMOD SIGHT GLASS GASKET

The only type produced by Mamod for all Sight Glass fitted boilers........................

£3.92
Quantity

MAMOD STEAM ENGINES

 SET OF FIVE BLACK Safety Valve O rings

See details next

 

£4.06
Quantity

For SR1A Steam Roller Canopy

Dimensions: 19.00cm x 0.8cm .................................

 

£4.11
Quantity

SW1 STEAM WAGON 

Dimensions: 15.5 x 1.5cm

£4.11
Quantity

Right for your Traction Engine and
the Steam Roller - plus others.

£4.16
Quantity

Mamod TE1/TE1a Canopy Decals

They are self adhesive and peeled from their backing strip and ..........................................

Dimensions: 24.3cm x 0.8cm

 

£4.21
Quantity

Don't burn your fingers! 

Heat Resistant Grip for any Mamod solid fuel burner tray............................

 

£4.31
Quantity

One of the biggest seller here at Model Enthusiasts. If you don't know, they are dead easy to fit.  Just slide the Leaf Spring along the axle cover and it will click in place.

£4.43
Quantity

.

 

£4.43
Quantity

Boiler Insert all Boilers

THIS WILL FIX YOUR SAFETY VALVE AND/OR WHISTLE PROBLEM.

£4.52
Quantity

YOUR WATER LEVEL PLUG LEAKS - BEST GET A NEW ONE!  3/16 BSF. STANDARD SIZE.

£4.52
Quantity

TRACTION ENGINE TE1 & TE1A: Made by Mamod and fitted to all of these Canopies.

 

£5.32
Quantity

Superb Steam Oil just right for Mamod steam engines.

Perfect for the steam enthusiast who wants to be sure the engine is not running dry.

Lovely drip feed bottle for ease of application.

£5.54
Quantity

BRAND NEW FOR ALL MAMOD OSCILLATING PISTON FOR ENGINES SUPPLIED BY MAMOD LTD

£5.71
Quantity

A problem with the  Mamod boiler?

PROBLEM WITH YOUR  BOILER? THIS WILL FIX YOUR 3/8TH SAFETY VALVE INSERT PROBLEM.

FOR THE SE1, SE2,  and SE3 ENGINES.

£5.89
Quantity

Steering Rod fitting & nut

ANY MAMOD STEERING ROD TO FIT NEW TYPE STEERING FORKS

 

£5.89
Quantity

MAMOD STEERING ROD FITTING & NUT
PRE 2020 TE1/TE1A/SW1A
AND
ALL SR1A ENGINES

 OLD STYLE STEERING ROD END FITTING

 

 

£5.89
Quantity

1/4" bsf thread

For your Mamod engine renovation project.

You can use this to blank off a spare thread such a whistle thread on many engines.

£6.13
Quantity

MAMOD STEERING FORKS TRACTION ENGING & STEAM WAGON (TE1/ TE1A/ SW1)
SPECIAL NUT and  SPRING  

PRE 2020 FORKS ONLY

NOT FOR STEAM ROLLER SR1A

£6.40
Quantity

Soldering Set for your Mamod repair or full renovation

Multicore solder (60% tin,40% lead)

The perfect solution to finish with a wonderful soldered joint to be proud of.

£6.44
Quantity

The best ever DIY manual to get your Mamod steam engine running properly.

All loaded onto a USB stick ready to read on your computer. Internet connection reqd.

This is our 6th version and is guaranteed to be the very best. wink

£6.86
Quantity

MAMOD STEERING FORKS STEAM ROLLER NUT/SPRING/WASHER

The nut is round and has a knurled grippable surface. NOT FOR TRACTION ENGINE
£6.98
Quantity

You will receive :
2 off  3mm x  8mm  copper closed end rivets
2 off brass screws
1 off perspex "glass" window
1 off rubber type gasket.

This Sight Glass Seal Kit is the cheapest way to repair/ renovate your Water Level Sight Glass. Basically, if you don't need the brass surround, you can save yourself some money compared with the full assembly price.

 

£7.00
Quantity

MSS fuel tablets for Mamod engines

20 solid fuel tablets for Mamod steam engines with free post and multi-buy discount options. Go to next page. 

Made of hexamine, the same as Mamod fuel tablets and with the same heat and burn time.

£7.33
Quantity Out of stock - call 0777 552 1452 to order

EASY BOILER FILL & EMPTY - NO MESSING

Boiler Filler Sucker

This is what you've been dreaming of for so long.

You are fed up with spending too long dribbling water into your boiler and then spilling it everywhere.

This is so simple.

>So simple ...........

£7.64
Quantity

This "retro" water level plug...... 3/16 BSW thread.

  • Mamod 2 lever, bull horns, water level plug
  • 3/16th BSW screw thread
  • For the older model Mamod SE2 and SE3 engines using the 3/16 bsw* threaded plug.

Please make sure you don't need the 3/16th BSF thread!

£7.69
Quantity

STANDARD WATER LEVEL PLUG FOR ANY MAMOD BOILER WITH ONE FITTED (EXCEPT SE2 and SE3). 3/16 BSF

TE1 / TE1A / SR1A / SW1 / SA1 /  SE*  /  SP* /  MM1 /  MM2 / etc ................

 

£7.69
Quantity

* Run your Mamod engine on compressed air.
* This adapter fits into the water level plug hole.
* The outer thread is the same as a car tyre thread.
* Provides a quick and easy way to test your engine.

£8.11
Quantity

Another great bit of innovation from a specialist supplier who has come up with a wizzo idea for testing and trial running your engine. For the whistle position.

£8.11
Quantity

Mamod Black Hub Caps

These black hub caps can be used instead of the more usual chrome hub caps.

£8.54
Quantity

Small Black Hub Caps

These can be used instead of the more usual chrome hub caps.

£8.54
Quantity

TRACTION ENGINE TE1A/ STEAM ROLLER SR1A/

You know what a car looks like without hub caps - same with your mobile engine.

These Hub Caps fit the larger diameter axle such as the rear wheels of the Traction Engine and the Steam Roller.

£8.54
Quantity

TRACTION ENGINE TE1A/ STEAM ROLLER SR1A/ ROADSTER ETC.SA1

These Hub Caps fit the smaller diameter axle such as the front wheels of the Traction Engine and the Steam Roller.

Also the other vehicles such as the Roadster SA1.

£8.54
Quantity

 UNION BRASS NUT & 0 RING

You will need this joining-knurled-nut that secures the steam pipe to the boiler 
if you have a KIT TYPE boiler that requires no soldering. 

 Cannot be used with a standard soldering type boiler.

£8.54
Quantity

FOR ALL MAMOD ENGINES WITH BURNER TRAYS THAT USE A SHIELD:

THIS FITS ALL SOLID FUEL BURNER TRAYS BUT NOT ALL ENGINES REQUIRE ONE.

£8.68
Quantity
 
Owing to the possibility/likelihood of historical manufacturing variations,
 before you click to purchase it is important to be sure this
 assembly is correct for your particular engine.
 Therefore please read the detailed description page.
 
 
£10.20
Quantity

BRAND NEW MAMOD STANDARD PISTON FOR ENGINES TE1A/ SR1A/ SA1/ SW1/  SP2 / SP3 / MM2 SUPPLIED BY MAMOD LTD.  NEW ONE PIECE DESIGN 2020 WITH ACCURATE PISTON OIL GROOVES.

£10.20
Quantity

 MAMOD SA1 ROADSTER BACK AXLE

ALSO FOR LIMO / VAN / BUS 

Length =  162mm

£11.64
Quantity
MAMOD BRASS CHIMNEY COWL
 
You will be amazed how attractive is your engine, regardless of age,
 when this Mamod produced Chimney Cowl is fitted.
 
Chimney and Smoke Box not included.
 
 

 

£11.75
Quantity

 Safety ValveSE1, SE2 and SE3, 3/8'' THREAD 

PLEASE CHECK YOURS IS NOT A 1/4 INCH THREAD - SOME ARE.

WE HAVE THOSE TOO.

£11.80
Quantity

Mamod (Standard) Safety Valve

This safety valve is compatible with most of the Mamod steam engines, such as TE1, TE1A, SR1, SR1A, SW1, SE2a, and various steam cars and static steam engines (SP2, SP4, SP5, etc.).

It has a 1/4 inch BSF thread and measures 38mm in length.

It does not fit the SE1 SE2 or SE3 models - please check our other listings for those.

£11.80
Quantity

STEAM ROADSTER REAR AXLE BRASS SPACER

For your Mamod Roadster etc. upgrade.
The Rear Axle requires a spacer on one side to bring the wheel
out to match the width of the front wheels.

£11.93
Quantity

MAMOD BRASS PULLEY ROADSTER

This is the Pulley that fits the current style SA1- where both Drive Bands are on the same side of the vehicle

There is a short Drive Band that connects this Pulley to the Flywheel and a longer one that connects the Flywheel to the driving road wheel.

This 32mm diameter pulley has no screw fixing but is an interference fit onto the shaft. If it is not a tight fit you can use a drop of Loctite or super glue.

£11.93
Quantity

MAMOD SIGHT GLASS  BRASS SURROUND 

<3 style="text-align: center;">One - brand new from Mamod Ltd.

For your Mamod engine repair project.

This is needed if your old brass surround is damaged.

This generally happens when drilling out the rivets.

£11.95
Quantity

BRAND NEW STRAIGHT FROM THE MAMOD FACTORY

For your SP2 or SP4 Mamod engine renovation project.

Our photo was taken with the protective film still affixed.

£12.75
Quantity

SP4 REVERING LEVER: Quite difficult to find anyone selling these little levers. This is the one currently being fitted to the SP4 engines now being made.

£12.89
Quantity